PICOTEST アッテネータ J2140A

参考価格: \22,050
価格: ¥21,497 (税込) (¥553の値引き)
ポイント: 215ポイント (¥215相当)
お届け日: 1ヶ月程度で発送致します。

  • 数量:

PICOTEST アッテネータ J2140A の 商品概要

J2140A Attenuator

What's included:
J2140A Attenuator
User manual
1 Year Warranty

Characteristic Rating
Maximum input level +20dBm
Input Impedance 50 ohms
Output Impedance 50 ohms
3dB Frequency Range DC-50MHz
Maximum VSWR 1.3
Attenuation accuracy 0.2dB
Impedance 50 Ohm



Model Description    
J2140A J2140A Attenuator (50 Ohm)
  • Product Information

There are two common uses for attenuators when used in conjunction with the network analyzer. One is to attenuate the oscillator source signal. While this may seem odd, one of the most common errors in analyzer measurements is using a source signal that is too large. Even though the analyzer allows setting of the signal output amplitude, the lowest setting is often too high to allow an accurate small-signal measurement to be made. The correct amplitude is the smallest amplitude that exceeds the noise floor.

Attenuators are also useful for improving the dynamic range of the measurement. In some cases, as in measuring the open loop gain of an opamp as one example, the low frequency loop gain will be extremely large (100dB or more is not uncommon). Attenuating the output signal increases the effective range of the measurement.

  • Integrated unit includes 40dB, 20dB and 10dB
  • Cascade for greater attenuation
  • Improve noise floor or assure small signal measurement